Friday, October 4, 2013

Small Brake Part Needed

I don't believe this is specific to this brake, a 2014 SRAM S-700, but maybe?

What I need is a banjo that can accept a fine thread compression nut.

The current banjo is a coarse thread banjo to accept a Connectamajig. Long story short, it doesn't work with the frame I've got. 

See on the left, a standard compression nut is fine threaded. In the middle is the coarse threaded Connectamajig, and the right is the banjo it goes into attached to the rear calliper.

The front calliper has the standard compression nut as you can see in this photo. 

Here's the rear calliper with the Connectamajig installed. 

Can anyone help?!